top of page

2K2: Frame Leak

Marker is leaking from the trigger frame. Check the items below. Reference the manual as needed.

Issue:
LPR:
  • Your LPR could be over-pressurizing your gun. Using a pressure tester, check that your pressure is set between 70-75 psi. See below for a video showing how to use a pressure tester.

  • Check your air hoses to see if they've become stretched or disconnected from the Ram Sleeve. This can happen due to over-pressurizing of your regulators. Re-connect or replace as needed.

Air Hoses:
Air Barbs:
  • Check the air barbs on the ram sleeve to make sure they are tight and undamaged. Tighten or replace if needed. 

  • If you suspect there is debris lodged inside your solenoid, you can

Solenoid:
2k2-solenoid2.jpg
bottom of page