top of page

Marq: Default Settings

The following is a list of the factory default settings for your marker, taken from the manual.

Details:
Factory Board Default Settings:
  • Dwell:  8ms

  • Bolt:  Delay

  • LPR:   80psi

  • HPR:   230psi

  • Cycle Delay (Dip Switch 1): On Fine Tuning Cycle Delay Active 

  • Debounce (Dip Switch 2): Off - Min Setting

  • Firing Cap (Dip Switch 3): Off - 15bps Cap Disabled (All Firing Modes)

  • Firing Modes (Dip Switch 4 & 5): Off/Off Semi Auto

  • Dwell (Dip Switch 6): Off - Dwell 8

bottom of page