top of page

Vice/Protege: Leak Down Barrel

Gun has an air leak down the barrel. Check the items below. Reference the manual as needed.

Issue:
Check the Following:
  • Ram: Remove the ram and inspect the o-rings for damage and replace if needed. Remove any dirt or lube from the ram and apply a small amount of Dow55 to the o-rings.

    • Ram cap o-ring:  1mm x 12mm (Dura 70)

    • Front ram o-ring:  006 (Dura 70)

    • Rear ram o-ring:  011 (Dura 70)

  • Poppet: Remove the poppet and inspect the cup seal portion for any nicks or damage that would cause it not to seal correctly. If damaged, replace the poppet. Next, check the poppet shaft o-ring and replace if needed. Lube with Dow55. Note: The cupseal is the white delrin piece on the front of the poppet shaft that looks like a plug.

    • Poppet Shaft o-ring: 006 (Dura 70)

vice-protege-ram-sleeve-01.jpg
bottom of page