top of page

Ego LV1.6: Leak Down Barrel

If your marker has an air leak down the barrel. Check the items below. ​Reference the manual as needed

- Unless stated, all o-rings are NBR70

Issue:
Leaking Down the Barrel:
  • Rammer Assembly: Remove your rammer, wipe it down & replace the o-rings listed below. Apply a small amount of Eclipse oil to each of the o-rings before reinstalling

    • Rammer Shaft - Front: 010

    • Rammer Shaft - Bumper: 010

    • Rear Shaft - Middle: 011

    • Rammer Shaft - Rear: 010

  • Valve Assembly: Remove your SL4 Inline reg & tuning fork to access the Valve Assembly. Inspect the Valve Guide & Exhaust Valve for physical damage & replace as needed. If these items look ok, replace the valve guide o-ring and lube with Eclipse grease. Incorrect reassemble can also cause an issue.

    • Valve Guide: 013

LV1.6: Bolt & Rammer
LV1.6: LPR & Exhaust Valve
bottom of page