top of page

Spyder Victor: Issues Firing

Marker will not fire or has a problem firing. Check the items below. Reference the manual if needed.

Issue:
Aired Up with No Leaks & Won't Fire:
  • Gun will not fire, or just barely fires. This assumes your gun is not currently leaking:

    • ASA: Check that the pin on your ASA is making contact with your air tank and air is pressurizing your gun.

    • C02 Tank: Check the pressure on your tank to confirm it's supplying enough air

    • Striker Bolt: Be sure your striker bolt o-ring is undamaged & lubed with a drop of oil

      • Striker Bolt oring: #14.3mm x 1.7mm 70pu

    • Debris: With the Bolt & Striker Bolt removed, check the body of your marker for debris & clean as needed

Marker Fires with Low First Shot:
  • C02 Tank: Check the pressure on your tank to confirm it's supplying enough air

Marker is Breaking Paint:
  • C02 Tank: Check the pressure on your tank to confirm it's supplying enough air

  • Detents: Check your detents for excessive wear/damage. Replace if needed.

  • Breach: Inspect the breach to confirm there isn't any debris that would cause you to break paint

  • Paint: Make sure you're using good quality paintballs and that you have a good paint to barrel match. Check out the following video for details

Bore Match Your Paintballs:
bottom of page